Overview
Captis Multi can be used to log data from multiple sensors to fulfill requirements across a broad range of applications and remote locations within the LTE-M and NB-IoT coverage areas on the Telstra IoT Network. It is designed to measure a range of parameters; be small in size; run for extended periods of time; and is certified for use within LTE-M and NB-IoT coverage areas on the Telstra IoT Network. The device is only available with an internal antenna. It is housed in an IP68 rated enclosure.
Features
- Sensor reading
- 4 inputs - 2 Digital, 1 Analogue, 1 Serial
- Alarming/Fast logging
- Internal antenna only
- Over the air firmware downloads over SSL
- Security protocol MQTTS
- No external power requried
- Able to be installed in-ground up to 600mm
Offer Includes:
- Telstra Captis Multi (Internal Antenna)
- Data: SIM with 10MB/month (refer to Things to Know for recurring data plan details)
Things to know about the Telstra Captis Multi before you buy:
Recurring Data Plan Details
- The device comes with a connectivity SIM on a 10MB/month plan
- You will be charged a recurring fee of $5.50 per month for 10MB data allowance. This will be charged at the beginning of each month and can be consumed during the same month.
Inclusions & Exclusions
- This offer includes an internal antenna only
- This offer does not include sensors, an external antenna, replacement battery, VPN access or an IoT Platform Tenancy. You will need sensors and an IoT Platform Tenancy to start using the device (refer to the Quick Start Guide for more details)
- The device comes with a warranty of 5 years or 5,000 transmissions, whichever comes first. This is ONLY applicable to devices with default configuration and devices installed by individuals who have completed the MIoT Certification: https://www.miot.com.au/support/training/
- This offer does not include professional/managed services for sensor and device integration, device registration, device installation, apps or telemetry
Purchasing The Telstra Captis Multi
- Customers can purchase a maximum of 10 devices, please contact your account executive or telstradev@team.telstra.com if more than 10 devices are required
- There is no minimum purchase required
- This device is only available to purchase on a valid Telstra Billing Account, not available for purchase using credit card
Other Details
- Default cellular connection is set to NB-IoT, dual support available for LTE-M
- MIoT certification is mandatory before installation https://www.miot.com.au/support/training/, fees apply
- This offer is not available to Value Added Resellers (VARs) / Independent Software Vendors (ISVs) - i.e the CAPTIS devices purchased on dev.telstra.com are for personal or direct business use, and not for the purpose of resale
If you want to learn more about Captis and it’s uses, check out our blog.
Once you have the device, The Captis Multi Quick Start Guide will help get you started.
To use the Captis device, you'll need the Telstra IoT Platform and get access your own tenancy.
Have a question? Check out our FAQs.
Can’t find what you’re looking for? Post your questions, suggestions and developer ideas on our IoT Devices Community Forum.
